Puff Panel Manufacturers in Chennai – Modular Clean Room India provide high-quality PUF (Polyurethane Foam) sandwich panels designed for superior insulation, durability, and energy efficiency. These panels are widely used in cold storage units, clean rooms, warehouses, industrial sheds, and prefabricated buildings. Modular Clean Room India a leading manufacturers in Chennai offer customized puff panels with excellent thermal insulation, fire resistance, and moisture protection, ensuring long-lasting performance in demanding environments. Available in various thicknesses and finishes, these panels are easy to install and maintain. Modular Clean Room India suppliers focus on precision manufacturing, cost-effective solutions, and compliance with industry standards. Choose reliable puff panel manufacturers in Chennai for innovative, eco-friendly, and high-performance building solutions tailored to your project needs.
A puff panel (commonly called a PUF panel) stands for Polyurethane Foam panel. It is a type of sandwich panel used in construction, made of an insulating foam core placed between two rigid outer sheets (usually metal like steel or aluminum).
A typical puff panel has three layers:
Maintain a stable indoor environment with precise temperature regulation, preventing fluctuations and ensuring efficiency.
Enhance energy efficiency with superior thermal resistance, reducing energy loss and maintaining consistent temperatures.
Reduce external heat impact, keeping indoor spaces cooler in summer and warmer in winter for better comfort and lower energy costs.
Enhances energy efficiency, helping to lower energy costs
Reduced heat flow lowers HVAC demand and energy loss.
High stiffness-to-weight ratio ensures dimensional stability.
Limits air leakage to maintain controlled internal conditions.
Factory-formed panels enable faster, precise on-site assembly
Ensures extended service life with minimal maintenance requirements.
| Panel thickness available | 50mm,60 mm, 80mm, 100mm, 120mm |
| Effective Width | 1150mm |
| Sheet type | PPGI, PPGL, SS304, SS316,GI-PU coated, GI,PC,PP |
| Sheet Thickness
|
0.4mm/0.45mm/0.5mm/0.6mm/0.8mm/1mm |
| Length Available | 1000mm – 6300mm |
| Density | 40± 2kg/m3 |
| Thermal Conductivity | 0.024 – 0.03 W/m |
| Temperature Range | -40+80℃ |
| CFC / HFC | Free From CFC / HFC |
| Bending Strength | 4.0kg/cm2 |
| Type of Sandwich | PUF,PIR, Rockwool, Honey comb (Aluminum/Paper craft) |
| Adhesion Strength | 2.9 kg/cm2 Foam to Steel |
| Heat Transfer Co-efficient | -0.022W/M2*k |
| Pressure | 0.10Mpa |
| Bending Strength | 4.0kg/cm2 |
| Compressive Strength | 2.1 kb/cm2 at 10% deformation |
| Cubic Area Change | =1%(-30 C – 100 C/96h) |
| Color | 20 micron RAL 9010 |
| Tensile Strength | 3.7 kg/cm2 |
| Top Coat | 5 + 15 micron |
| Back Coat | 5 + 5 micron |
| 500h (ECCA TB) | 100 h (ASTM D 2247) |
| Panel Length | Customized as per requirement(Up to 6300mm) |
| Joinery | Tongue-and-groove, Clean room M-section panel |
| Water Vapour Permeability | 0.08-0.12 gms/hrm2 (at 90% RH & 38°C) |
| Sealing | Joints sealed for continuous silicone |
| Paint Coatings | Pre-painted, powder coated |
| Polyester primer | 5 micron Non-toxic food-graded STANDARD polyester finish paint. |
A puff panel (commonly called a PUF panel) stands for Polyurethane Foam panel. It is a type of sandwich panel used in construction, made of an insulating foam core placed between two rigid outer sheets (usually metal like steel or aluminum).
A typical puff panel has three layers:
Maintain a stable indoor environment with precise temperature regulation, preventing fluctuations and ensuring efficiency.
Enhance energy efficiency with superior thermal resistance, reducing energy loss and maintaining consistent temperatures.
Reduce external heat impact, keeping indoor spaces cooler in summer and warmer in winter for better comfort and lower energy costs.
Enhances energy efficiency, helping to lower energy costs
Reduced heat flow lowers HVAC demand and energy loss.
High stiffness-to-weight ratio ensures dimensional stability.
Limits air leakage to maintain controlled internal conditions.
Factory-formed panels enable faster, precise on-site assembly
Ensures extended service life with minimal maintenance requirements.
| Panel thickness available | 50mm,60 mm, 80mm, 100mm, 120mm |
| Effective Width | 1150mm |
| Sheet type | PPGI, PPGL, SS304, SS316,GI-PU coated, GI,PC,PP |
| Sheet Thickness
|
0.4mm/0.45mm/0.5mm/0.6mm/0.8mm/1mm |
| Length Available | 1000mm – 6300mm |
| Density | 40± 2kg/m3 |
| Thermal Conductivity | 0.024 – 0.03 W/m |
| Temperature Range | -40+80℃ |
| CFC / HFC | Free From CFC / HFC |
| Bending Strength | 4.0kg/cm2 |
| Type of Sandwich | PUF,PIR, Rockwool, Honey comb (Aluminum/Paper craft) |
| Adhesion Strength | 2.9 kg/cm2 Foam to Steel |
| Heat Transfer Co-efficient | -0.022W/M2*k |
| Pressure | 0.10Mpa |
| Bending Strength | 4.0kg/cm2 |
| Compressive Strength | 2.1 kb/cm2 at 10% deformation |
| Cubic Area Change | =1%(-30 C – 100 C/96h) |
| Color | 20 micron RAL 9010 |
| Tensile Strength | 3.7 kg/cm2 |
| Top Coat | 5 + 15 micron |
| Back Coat | 5 + 5 micron |
| 500h (ECCA TB) | 100 h (ASTM D 2247) |
| Panel Length | Customized as per requirement(Up to 6300mm) |
| Joinery | Tongue-and-groove, Clean room M-section panel |
| Water Vapour Permeability | 0.08-0.12 gms/hrm2 (at 90% RH & 38°C) |
| Sealing | Joints sealed for continuous silicone |
| Paint Coatings | Pre-painted, powder coated |
| Polyester primer | 5 micron Non-toxic food-graded STANDARD polyester finish paint. |
A puff panel (commonly called a PUF panel) stands for Polyurethane Foam panel. It is a type of sandwich panel used in construction, made of an insulating foam core placed between two rigid outer sheets (usually metal like steel or aluminum).
A typical puff panel has three layers:
Maintain a stable indoor environment with precise temperature regulation, preventing fluctuations and ensuring efficiency.
Enhance energy efficiency with superior thermal resistance, reducing energy loss and maintaining consistent temperatures.
Reduce external heat impact, keeping indoor spaces cooler in summer and warmer in winter for better comfort and lower energy costs.
Enhances energy efficiency, helping to lower energy costs
Reduced heat flow lowers HVAC demand and energy loss.
High stiffness-to-weight ratio ensures dimensional stability.
Limits air leakage to maintain controlled internal conditions.
Factory-formed panels enable faster, precise on-site assembly
Ensures extended service life with minimal maintenance requirements.
| Panel thickness available | 50mm,60 mm, 80mm, 100mm, 120mm |
| Effective Width | 1150mm |
| Sheet type | PPGI, PPGL, SS304, SS316,GI-PU coated, GI,PC,PP |
| Sheet Thickness
|
0.4mm/0.45mm/0.5mm/0.6mm/0.8mm/1mm |
| Length Available | 1000mm – 6300mm |
| Density | 40± 2kg/m3 |
| Thermal Conductivity | 0.024 – 0.03 W/m |
| Temperature Range | -40+80℃ |
| CFC / HFC | Free From CFC / HFC |
| Bending Strength | 4.0kg/cm2 |
| Type of Sandwich | PUF,PIR, Rockwool, Honey comb (Aluminum/Paper craft) |
| Adhesion Strength | 2.9 kg/cm2 Foam to Steel |
| Heat Transfer Co-efficient | -0.022W/M2*k |
| Pressure | 0.10Mpa |
| Bending Strength | 4.0kg/cm2 |
| Compressive Strength | 2.1 kb/cm2 at 10% deformation |
| Cubic Area Change | =1%(-30 C – 100 C/96h) |
| Color | 20 micron RAL 9010 |
| Tensile Strength | 3.7 kg/cm2 |
| Top Coat | 5 + 15 micron |
| Back Coat | 5 + 5 micron |
| 500h (ECCA TB) | 100 h (ASTM D 2247) |
| Panel Length | Customized as per requirement(Up to 6300mm) |
| Joinery | Tongue-and-groove, Clean room M-section panel |
| Water Vapour Permeability | 0.08-0.12 gms/hrm2 (at 90% RH & 38°C) |
| Sealing | Joints sealed for continuous silicone |
| Paint Coatings | Pre-painted, powder coated |
| Polyester primer | 5 micron Non-toxic food-graded STANDARD polyester finish paint. |
Reduces energy costs by improving temperature control.
Protects sensitive drugs from temperature fluctuations.
Reduces thermal loss, ensuring operational efficiency.
Ensures energy-efficient operation in extreme temperatures.
Maintains climate control for production and storage areas.
Controlled environments
Hygienic processing rooms, Food Processing Industry, Milk & Dairy Industry, Seafood Industry, Meat & Poultry Industry, Floriculture Industry
Enhances energy efficiency by maintaining optimal temperatures.
They are used as insulated Ceiling and wall construction in factories, warehouses, workshops and commercial buildings, fast-expansion interiors.
Poultry Farms, Grain Storage
Telecom Shelters, Data Centre Partitioning & Cladding
Dust-controlled rooms
Prefab Buildings, Site Offices, Temporary Accommodation Units
Best in pharmaceutical departments, laboratory and electronics production locations where cleanliness is required and precision is imperative
Progressive PUF panels (tongue-and-groove) are installed sequentially, making them rigid, affordable, and ideal for permanent, fast construction.
Non-progressive PUF panels allow individual panel removal for repairs or reconfigurations without disturbing adjacent panels, making them better for flexible, high-end cleanrooms (pharma, electronics) needing modifications.
